Part Number

-

P

-

L

-

T

-

H

Type

Material Code

D

KJB KJBF

ST S

10 10

- -

P3.97 P7.00

- -

L6 L15

- -

T2 T5.0

-

H15

P	H7
2.00~?3.00	+0.001 0
3.01~?6.00	+0.012 0
6.01~10.00	+0.015 0
10.01~18.00	+0.018 0
18.01~30.00	+0.021 0
30.01~32.00	+0.025 0

■①T Selectable: Select Type, Material Code, D Dimension (For details, refer to ordering example below).

Part Number				P 0.01mm Increment	L 1mm Increment	T±0.05			H	R
Type		Material Code	D
		ST STM STS[ ! ]3 STSC	8	2.00~?6.00	5~40 When P<4 L≤Px4 When P≥4 L≤Px3	2	3	5	D+4	1.0
Standard Type			10	2.00~?8.00
(P+0.03 +0.01)	(PH7)		12	4.00~10.00						2.0
KJB	KJBH		16	8.00~14.00
Press Fit Type			20	10.00~18.00
(P+0.03 +0.01)	(PH7)		25	15.00~23.00
KJBP	KJBPH		30[ ! ]4	20.00~27.00
			35[ ! ]4	25.00~32.00

[ ! ]3 For 304 Stainless Steel, there must be a 2mm or greater wall thickness {(D?P)/2≥2}. [ ! ]4 D=30 and 35 are applicable to SKS93 Tool Steel (JIS) (except electroless nickel plating) only.

■②T, H Configurable: Select Type, Material Code, D Dimension (For details, refer to ordering example below).

Part Number				P 0.01mm Increment	L 1mm Increment	T ±0.01 0.1mm Increment	H 1mm Increment	R
Type		Material Code	D
Standard Type		S SM SS[ ! ]3 SSC	8	2.00~ 6.00	5~40 When P<4 L≤Px4 When P≥4 L≤Px3	2.0~5.5	10~16	1.0
(P+0.03 +0.01)	(PH7)		10	2.00~ 8.00			12~18
KJBF	KJBFH		12	4.00~10.00			14~20	2.0
Press Fit Type			16	8.00~14.00			18~26
(P+0.03 +0.01)	(PH7)		20	10.00~18.00			22~37
KJBPF	KJBPFH		25	15.00~23.00			27~40

[ ! ]3 For 304 Stainless Steel, there must be a 2mm or greater wall thickness {(D?P)/2≥2}.